||Proposal for using an Incremental (Serial) Tap
||"Hand tap M30 x 3.5" is being ...
||Number of Tap flutes
||We have received an order for HT P3 M12X...
||Standard of Center Hole and Center Hole Drill
||I was recently asked to machine 2 center...
||I would like to specify the length of th...
||The difference between PT and NPT threads
||Can you please tell me the difference be...
||Bicycle Tire Valve Threads
||I will be manufacturing two different ty...
||Supply of medical surgical tools
||We mainly produce and sell implants and ...
||About your order for surgical tools for orthopedics
||We are a trading company. We deliver med...
||Tire Valve Threads for Automobiles
||I've received a request to quote parts w...
||Percentage of oil concentrate to water ratio in a water soluble cutting oil
||We carry out our tapping processing usin...
||About MJ threads tapping
||I need to produce a "MJ 8X1" i...
||About Spiral Fultes on the Tap
||Even though I ordered coated spiral poin...
||Types of Center drills
||I am a apprentice machinist and I am dri...
||Introduction of Die Attachment
||I need a die holder that corresponds to ...
||The front and back of Solid Round Dies and the role of each part
||I heard that YAMAWA's "Solid Round ...
||Oversize cutting of internal threads
||When tapping with a tension/compression ...
||Horizontal prcessing with a SP tap
||We are tapping a M12 × 1.75 on a wo...
||Solid Dies : D
||I ordered a cutting die according to YAM...
||Pilot hole for tapered pipe thread tapping-2
||When processing a Rc (PT) internal taper...
||Pilot hole for Tapered Pipe Thread-1
||Can you give me some advise for machinin...
||Simple Thread Inspection Tool : SITD
||We produce about 10,000 M6x1 tapped part...
||Simple Thread Inspection Tool-SIT
||We are tapping both Metric and Unified s...
||Processing the pilot hole into a taper
||We are processing a Rc (PT) 1/4-19 Taper...
||Tap Limit for 3B Unified Threads
||We are planning to work on aircraft part...
||Recommended taps to Cut Magnesium Alloy
||We received an order for digital camera ...
||Recommendation of HFICT
||We are in mass production tapping FC250 ...
||Recommendation of N-CT FC Taps
||We are tapping FC-250 castings in mass p...
||FC-HT recommended to mass production in Cast Iron
||We have tapped a small amount of FC 250 ...
||CTC-Thin Steel Conduit Threads
||We received a request for a quotation fo...
||CTG-Thick Steel Conduit Threads
||This time, we received an order for work...
||Calculation of pilot hole
||We are roll tapping a M6X1 thread in SS4...
||Roll Tap:Product Features and Instructions for use
||I've heard that processing a thread with...
||Actual Use of Center Drill
||I've heard that processing a thread with...
||External Thread Length at processing with D PT
||We are planning to process a PT 3/8-19 e...
||Indication of the nominal size-2
||I understand the nominal size of Metric ...
||Indication of the nominal size-1
||I have a basic question on the taps list...
||Tap for Left Hand Thread
||Our customer asked us to make an "M...
||Difference between PT and NPT for Pipe Taps
||We have a contract to produce a 3/8 NPT ...
||External Camera Tripod Threads
||We received an order for producing the e...
||Pitch Diameter of Pipe Threads
||There are various kinds of "pipe th...
||Pipe Taps: Combination of Internal and External Pipe Threads
||There are many kinds of pipe threads wit...
||Basic Diameter Position when processing with a Tapered Pipe Tap-Hand Tapping
||I am hand tapping a PT 1/4-19.
||Basic Diameter Position when processing with Taper Pipe Taps
||We are going to machine PT1/2-14 taper p...
||Specifications of Tr and TM Internal Screw Threads
||I found the specification of "TM10X...
||Pipe Threads: Nominal Sizes and Dia.
||Major diameters of Unified threads, such...
||What is PJ threads?
||I purchased a water faucet to attach to ...
||Nominal size of the unified threads
||The nominal sizes smaller than 1/4"...
||How to call inch threads?
||In some of our drawings, there are threa...
||Tapping Hard Material of 50 HRC
||We are producing internal threads on pla...
||Tapping 60HRC Ultra-Hard Materials
||We are manufacturing some M10X1.5 press ...
||Two Start Thread (Double Thread)
||I have a process drawing with the design...
||CPC-S: Checking minor diameter processed with a roll tap
||We are processing a screw thread with a ...
||Class 2, 6H internal thread and a tap P class
||Is it possible to process a 6H internal ...
||Class P of cutting taps
||I thought that the tolerance class of a ...
||Tapping tripod mounting screw
||I received an order for camera component...
||The difference between Tripod threads and Unified threads
||I found a hand tap that was marked with ...
||What is Pg screw thread?
||I have a new drawing showing a Pg 13.5 i...
||The difference between HT, SP, and PO
||I've heard there are HT Hand Taps, SP Sp...
||Effect of Nitriding Treatment
||I am tapping in cast iron. I use FC-HT h...
||Whitworth fine threads
||This time, we received an order for a wo...
||How to create UNJF external threads?
||I'm producing an aircraft part that has ...
||The difference between UNJF and UNF
||This time I need to work on aircraft par...
||The coolant filtration and discharge pressure
||I plan to purchase a CNC machining cente...
||The difference between Flute Notching and Chipping
||When it comes to tapping problems, I've ...
||What does the word Welding mean?
||I continue to see the word "Welding...
||Difference between G and PF-2
||Is the external parallel pipe threads &q...
||Difference between G and PF
||Can you tell if "G" internal p...
||The differences between Rp and PS
||Are the "Rp" and the "PS&...
||The differences between R and PT
||The differences between a "Rc"...
||The difference between Rc and PT
||I do not understand all of Taper Pipe Th...
||How to prevent tap breakage problem
||I'm using a standard M8 × 1.25 tap ...
||Plating thickness and selection of tap class
||I am using a spiral point tap with a sta...
||Plating thickness and oversized tap
||I have a question about applying a plati...
||Yamawa's Solid Threading Die: D
||I am threading a M12 × 1.5 bolt tha...
||D PT: Solid Round Dies for Taper Pipe Threads
||In order to machine a external PT Thread...
||Effectiveness of oxidizing
||I need to create a M7 X 1 and a M10 X 0....
||How to create an internal insert coil thread?
||My drawing has instructions stating, &qu...
||Removing the center point from a Spiral Fluted Tap
||I'm using an M6 X 1 Spiral Flute tap to ...
||How to use coolant through taps
||Coolant through taps are categorized by ...
||Symbol of Roll Tap chamfer
||What does the letter "P" repre...
||Torn thread problems when tapping with large size taps.
||I mainly use water soluble oil when tapp...
||Spiral Fluted Taps: Improvement of the entangled chipping problem
||I have a problem with chips getting enta...
||About tap regrinding Vol.3
||Currently, I am regrinding large size ta...
||About tap regrinding Vol.2
||I'm thinking of regrinding taps to reuse...
||About tap regrinding Vol.1
||I would like to continue using my worn t...
||The difference between Pipe Tap G(PF) and Rp(PS)
||I know there are G(PF) and Rp(PS) taps a...
||The meaning of the Synchronized Taps
||When I search for products, I find taps ...
||How to select Taps for Ultra High Speed Tapping?
||Does YAMAWA offer taps for ultra high sp...
||Easy recognition for Centering Drilling
||I noticed a description "JIS B 0041...
||Cutting Taps: How to calculate a hole
||How I can calculate the hole size before...
||The difference between Unified Thread and Whitworth Thread
||Our customer is requesting a 5/8-11 Hand...
||Thread diameter is 0.3 mm larger than standard
||I was instructed by my parent company to...
||What are Helisert Taps?
||Does YAMAWA produce and sell specific ta...
||How to avoid stop lines in PT internal screw threads
||Do you know how I can avoid generating s...
||Hot dip zincing and the class of tap to select
||What is Hot Dip Zincing ? Any taps exclu...
||Torn Taper Pipe Threads
||I have a torn thread problem when tappin...
||Miniature Screw Thread
||Can you tell me, what does the thread sp...
||How to use Point Drills
||I have a surface finish problem on the d...
||How to select the correct tap class on Roll Taps
||I have a problem using Roll Taps to crea...
||The difference between SP and +SP Taps
||How I can distinguish between when to us...